Tang Dynasty French Oak Flooring

Lifewood floorboards are a mixture of both thanks to our patented Stabilised Solid manufacturing structure.

Our boards are engineered using solid timber on all 3 layers of the board. This enables us to use the most beautiful part of the timber as the surface layer and the less attractive pieces as the bottom layers. We’re able to utalise a lot more of the tree with this method.

The middle layer of the board is cross-engineered at a right angle and functions as the core layer of the board. This cross-layering gives the core the ability to yield to the natural movement of its environment, and yet hold this movement entirely within its core, so it does not affect the top and bottom layers of the floorboard. This detailed, extensive part of the process is precise and quality controlled with great attention.

All Lifewood floors are pre-finished timber boards which come with 9 layers of Polyurethane protective coating, applied to all 6 sides of each board. This makes the floor highly resistant to spillage and day to day surface wear.

This advanced coating makes the floor suitable for active households and is pet-friendly. Commonly, most surface scratches will just mark the coating and not penetrate the wooden surface. These scratches can be easily covered with a textile marker which we give to all our clients.

We will always suggest to direct stick a Lifewood floor.

Direct stick is a method of installation where the floor boards are glued directly to the sub floor using timber floor adhesives.

The advantages of this way of installation are that you can sand and polish the floor more times giving your floor a much longer lifetime, plus it eliminates hollow echo from under the boards.